| PIP |
| Load Cells | |||
Load cells presently manufactured by AEP transducers are included in the requisites of OIML R60 regulations (International Organization of Legal Metrology) which establishes all the tests (temperature, moisture, barometric pressure, etc...) to be passed by the product in order to be included in certain precision classes C2, C3, C4 . Load cells ATEX certificate for zones 1 and 21 (Gases and Dust). To ensure these requisites, AEP transducers has developed inside itself some direct-weight automatic equipment which were accredited by SIT in 1996 for model control according to this regulation. Load cells are periodically checked by Metrological Laboratory personnel who performs constant tests on series production, with an always careful view to the product continuous improvement. Thanks to technical staff know-how,all the procedures to perform model approval for legal uses are being activated by autorithies in control. |
|||
Model |
Characteristics |
||
WIMOD
|
WIRELESS C2S - CLS - D100 T20 - TCE |
||
CLS
|
Nominal Load from 30 to 500 t Class (OIML R60): C1, C2 Combined Error: 0.045%, 0.023% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP68 |
||
CBS
|
Nominal Load 250 kg ~ 100 t |
||
C2S
|
Nominal Load 100 kg ~ 200 t |
||
C2SAMP
Compression
|
Nominal Load from 100 kg to 200 t Linearity: 0.03% Material: Stainless Steel Output: 4-20mA, 5V, 10V LASER welded Protection: IP68 |
|
|
UPC
Compression |
WEIGHING UNIT Nominal Load from 100 kg to 30 t Executed in: Stainless Steel AISI 304. Equipped with a system of: Auto-alignment. Transversal sliding |
||
TCA
Compression |
Nominal Load from 1 to 50 kg Linearity: 0.03% Material: Aluminium Output: 2mV/V Protection: IP20 |
||
TCE
Compession |
Nominal Load from 350 kg to 20t Linearity: 0.03% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP67 ATEX certificate (Zones 1 and 21) |
||
TCEAMP
Compession |
Nominal Load from 350 kg to 20t Linearity: 0.03% Material: Stainless Steel Output: 4-20mA, 5Volt, 10Volt LASER welded Protection: IP67 |
||
TS
Tension |
Nominal Load from 10 kg to 7.5 t Class (OIML R60): C2, C3, C4 Combined Error: 0.023%, 0.018%, 0.015% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP68 (10, 25, 50kg IP65) |
||
TSAMP
Compession |
Nominal Load from 10 kg to 7.5 t Linearity: 0.03% Material: Stainless Steel Output: 4-20mA, 5Volt, 10Volt LASER welded Protection: IP65 |
||
T20
|
Nominal Load from 5 to 20 t Class (OIML R60): C2, C3 Combined Error: 0.023%, 0.019% Material: Stainless Steel Output: 2mV/V LASER welded |
||
D100
Tension |
Nominal Load from 20 to 100 t Linarity: 0.10% Material: Stainless Steel Output: 1mV/V LASER welded |
||
CLT
Compression |
Nominal Load from 100 to 250 t Linearity: 0.10% Material: Stainless Steel Output: 2mV/V LASER welded Protection: IP65 |
||
F1
|
Nominal Load from 2.5 to 200 kg Class (OIML R60): C2, C3 Combined Error: 0.026%, 0.020% Material: Stainless Steel Output: 2mV/V LASER welded |
||
F3
|
Nominal Load from 10 kg to 2 t Class (OIML R60): C2, C3 Combined Error: 0.027%, 0.018% Material: Stainless Steel Output: 2mV/V LASER welded |
||
FT1
|
Nominal Load from 350 kg to 7.5 t Class (OIML R60): C2, C3 Combined Error: 0.024%, 0.018% Material: Stainless Steel Output: 2mV/V LASER welded |
||
UPFT1
|
WEIGHING UNIT Nominal Load from 350 kg to 5 t Executed in: Stainless Steel AISI 304. WITH ELASTOMER |
||
FT2
|
Nominal Load from 500 kg to 5 t Class (OIML R60): C2, C3 Combined Error: 0.024%, 0.018% Material: Stainless Steel Output: 2mV/V LASER welded |
||
UPFT2
|
WEIGHING UNIT Nominal Load from 500 kg to 2 t Executed in: Stainless Steel AISI 304. WITH ELASTOMER |
||
FT6
|
Nominal Load from 5 to 100 kg Class (OIML R60): C2 Combined Error: 0.028% Material: Stainless Steel Output: 2mV/V LASER welded IP67 |
||
Compression
 |
